What are the error codes on a Balluff SmartLight?

The first input process data byte contains the error value for configuration errors on the Smartlight.  There could be different errors that can be present at the same time, but only the error code with the highest priority will be sent in the input process data.  There error codes are the following:

0 - No Error

1 - Wrong Mode Selected

2 - Level Value Out of Range

4 - Wrong Number of Segments Selected 

5 - Wrong Frequency Selected

6  - Wrong Speed Selected

7 - Wrong Buzzer Function Selected - only in the case of SmartLight with Audible/Buzzer

The lower the value, the higher the priority.